Thin film surface panel process from tactileo application Watch Video

⏲ Duration: 2:15
✓ Published: 07-May-2024

Description:
Thin film surface panel process<br/><br/>The laminating process of thin film veneer is a comprehensive process involving several key steps. The following is the basic process of the film surface coating process:<br/><br/>First, substrate preparation: First of all, choose the appropriate transparent substrate material, such as glass or polyester film. These substrate materials need to be cleaned and coated with the underlying material to ensure a clean, smooth surface and provide a good foundation for subsequent film coating.<br/>Second, coating film layer: In the prepared substrate coated with liquid film materials, these film materials can be polyester, polyamide, polycarbonate, etc. After the coating is completed, the liquid film material is converted into a solid film layer by heating or ultraviolet curing technology.<br/>Third, pattern production: on the cured film layer, through advanced technology such as lithography or inkjet printing, the required pattern is produced. These patterns can be customized according to specific needs to achieve different visual effects and functions.<br/>Fourth electrode preparation: prepare conductive electrodes on the film layer, such as ITO film, etc. These electrodes are a key part of the film panel to achieve touch, sensing and other functions.<br/>Fifth. Encapsulation: The made film layer and other necessary layers (such as isolation layer, insulation layer, etc.) are packaged together through air or liquid packaging materials to form a complete film surface sticker. The packaging process needs to ensure a tight bond between the layers to provide good durability and stability.<br/>In addition, the film surface coating process also involves some auxiliary steps, such as cutting, attaching, trimming and so on. In the cutting step, the film is cut appropriately according to the actual needs to ensure that its size matches the surface to be affixed. During the attaching process, it is necessary to ensure sufficient contact between the film and the surface to be affixed, and to remove bubbles and dust. The dressing step is the final adjustment and optimization of the attached film panel to ensure that its appearance and performance reach the best state.<br/><br/>In general, the film surface coating process is a complex and delicate process that requires strict adherence to operating specifications and processes to ensure the quality and performance of the final product. At the same time, with the continuous progress of technology and the constant change of the market, the film surface coating process is also constantly optimized and innovative to meet the increasingly diverse application needs.