_stent-simulation-biomechanics-fea-biomedical-simulation-mp4.jpg "Stent Simulation_Biomechanics FEA_Biomedical Simulation.mp4 from ansys fluent Video Screenshot Preview")
GalleryPlay Video:
(Note: The default playback of the video is HD VERSION. If your browser is buffering the video slowly, please play the REGULAR MP4 VERSION or Open The Video below for better experience. Thank you!)
⏲ Duration: 80 sec
✓ Published: 27-Jul-2022
✓ Published: 27-Jul-2022
Description:
Ansys Workbench Simulation of Stent.n1. I have used symmetry in this particular Simulationn2. Structural steel is used as stent material with Bilinear Isotropic Hardening Propertyn3. After 1.5 seconds in this video, No movement is there because of plastic property with springback effect.n4. A hidden part is used to displace the stent.nnThanksnSufian AhmadnEmail- studentsufian@gmail.comnWhatsApp number:- +91 7393829812nnnkeywords:-nAnsys, Simulation, FEA, Stamping, Finite Element, Fem, Non Linear
Ansys Workbench Simulation of Stent.n1. I have used symmetry in this particular Simulationn2. Structural steel is used as stent material with Bilinear Isotropic Hardening Propertyn3. After 1.5 seconds in this video, No movement is there because of plastic property with springback effect.n4. A hidden part is used to displace the stent.nnThanksnSufian AhmadnEmail- studentsufian@gmail.comnWhatsApp number:- +91 7393829812nnnkeywords:-nAnsys, Simulation, FEA, Stamping, Finite Element, Fem, Non Linear
Share with your friends:
Whatsapp | Viber | Telegram | Line | SMS
Email | Twitter | Reddit | Tumblr | Pinterest
Related Videos
_fluent.webp "الفيديو ده بيمشي خطوة خطوة مع أي حد عمره ما استخدم برنامج الـ ANSYS قبل كده وعايز يتعلمه.nفي الفيديو ده بنعمل محاكاة لسريان في أنبوبة ثنائية الأبعاد، وبمشي خطوة خطوة من بداية تعريف الشكل وعمل ال MESH وفي النهاية تحديد المتغيرات اللازمة في الـ Fluent علشان يحل ويديني شكل السريان في ال")
_multi-roll-forming---corrugated-forming-process-in-ansys-mp4.webp "Ansys software is used for this simulation. Simulation shows the forming process of aluminum plate of near about 1.3 mm , nQuad mesh is used for this simulation, however Tet mesh can improve the results.nnBoundary Conditions;n1. Revolute joint is used for each rollern2. For plate , displacement is used in which I specified the distance to be covered. further vertical displacement is set to be freen3. Large diflection is onn4. Used augmented Lagrange methodn5. Friction coefficient is used as .34")
_webinar-using-mpcci-to-model-fluid-structure-interaction-with-abaqus-and-third-party-cfd-tools.webp "The MpCCI CouplingEnvironment supports a smooth combination of Abaqus with 3rd party CFD codes: ANSYS Fluent, FINE/Open, FINE/Turbo, OpenFOAM, STAR-CCM+, and STAR-CD. The open programming interface further on allows to integrate own and inhouse codes to the MpCCI coupling framework.nnWhen a surrounding fluid exerts pressure on a flexible structure this structure deforms- which leads to changes in the flow field of the fluid. These so-called fluid-structure interactions appear in different applic")
⏲ 33 min 51 sec ✓ 24-Aug-2021
_ev-battery-design-session-3.webp "In session-3, we will discuss about different types of method available in Ansys fluent battery model along with their theory.")
_pipe-wire-tube-bending-simulation-using-two-contact-support-in-ansys-workbench-mp4.webp "Sufian ahmadnWhatsApp No. +91 7393829812nMail: studentsufian@gmail.comnnnNote:- I intake Final Year Project || Post Graduate Thesis || Industrial Projectnnnkeywords:-nAnsys, Simulation, FEA, Stamping, Finite Element, Fem, Non Linear, Analysis, Ansys Workbench, Spring back, Springback, Finite Element Analysis, Finite Element Method, Manufacturing Simulation, Manufacturing Process, Process, Ansys 16, Ansys 17, Ansys 18, Ansys 19, Stress, Strain, Von mises, Plastic Strain, Force Reaction, Manufac")
⏲ 1 min 11 sec ✓ 27-Jul-2022
_rolling-process---cold-rolling-process-in-ansys-workbench-mp4.webp "ANSYS Workbench Software is used to Simulate the Problem.nThe Roller Materials are Titanium alloy and the billet material name is Alluminium Alloy. Coefficiant of friction used is of .34 , Augmented Langrange method is used to solve, further Weak Spring and Large Deformation is set to be on.nAbout 17 iterations is done to achieve the results, nThe billet is moving up during the process is because the z displacement is set to be free with x Displacement .The question arises that why billet is not")
_impregnation.webp "Made with ANSYS Fluent")
_simulating-a-single-battery-cell-using-the-msmd-battery-model-in-ansys-fluent-mp4.webp "Learn how to set up a lithium-ion battery cell simulation using the MSMD battery model in ANSYS Fluent and how to calculate voltage and temperature of the battery for different discharge rates.")
⏲ 2 min 50 sec ✓ 23-Aug-2022
_fluent.jpg)
_multi-roll-forming---corrugated-forming-process-in-ansys-mp4.jpg)
_webinar-using-mpcci-to-model-fluid-structure-interaction-with-abaqus-and-third-party-cfd-tools.jpg)
_ev-battery-design-session-3.jpg)
_pipe-wire-tube-bending-simulation-using-two-contact-support-in-ansys-workbench-mp4.jpg)
_rolling-process---cold-rolling-process-in-ansys-workbench-mp4.jpg)
_impregnation.jpg)
_simulating-a-single-battery-cell-using-the-msmd-battery-model-in-ansys-fluent-mp4.jpg)
![[+]](/images/menu.gif){kind=small}